Sandie has done it again! Another fantastic tutorial, perfect for some last minute touches!
Stitched circle and Tag dies
Turn the card 90 degrees so that the .25″ section is at the bottom and score on the 11 5/8″ side at 4″ 7.5″, 9.5″ and 9.75″
Fold and crease on the socrelines. Mountain fold all the scorelines except the 9.5″ and 9.75″, which should be valleyed.
Turn the card piece to the portrait position with the 0.25″ section on the left. Measuring from the 0.25″ score line, place a pencil mark at 1.75″ and 2.25″ on both the 9.5″ and 9.75″ score lines
Fold the card in half on the 4″ score line. Make sure you can see the centre 1″ pencil mark. Cut on the folded side, from the 7.5″ score line up to the inner pencil marks on the 9.5″ line, then cut straight up from the pencil mark on the 9.5″ line to the 9.75″ line.
Taper the edges of the 1″ tab as shown.
From the bottom, cut up on the 4″ score line, to the first intersecting line. Remove the bottom section o the 0.25″ tab.
For the layers, cut four pieces of white card measuring 3 7/8″ (W) x 3 3/8″(H) and four pieces of paper measuring 3.75″ x 3.25″
To make the paper layers for the top section of the box, cut a piece of card measuring 3 7/8″ x 1 7/8″. On the bottom of the long side, make a pencil mark in the centre (1- 15/16). From the top, measure down 7/8″ on both sides.
Cut from the centre pencil mark on the bottom, diagonally to the 7/8″ pencil marks on both sides. Snip the point at the bottom. Use this template to make 4 paper layers.
Apply adhesive to the 0.25″ tabs on one of the base pieces and adhere the other piece to it. Turn over to the inside and fold in the side with the other 0.25″ tabs, apply adhesive to the tabs and then fold in the over side of the card base.
Cut a stitched circle from white card and a smaller circle from paper. Cut 4 borders, one for each side of the box, and some tags if desired.
Adhere the borders to the top of the paper panels, trimming to size.
Adhere the circles together and then, using foam tape, adhere the image down into the middle
Adhere the circles to the front panel of the box, tucking the tags in behind if desired.
Fold in the bottom sections glue down.
Tie a ribbon around the 9.5″/9.75″ section and pull tight to make the cracker shape and close the box.
Share your personal favourite Stamping Bella creations with us. We LOVE to see what you’ve been creating with Stamping Bella stamps. Share a link to your latest Stamping Bella card in the comments below, or an old favourite you made a while ago. Tell us what your favourite stamps are. Are there any additions you would like to see to the range? Let us know!
Another way to connect is by joining us in the Stamping Bella Sistahood Facebook Group and share your pictures.
If you are posting your images online, we would love to see them on Instagram and all the platforms mentioned above. To make it easier for us to find you just use #stampingbella as a hashtag. Even better tag me @markergeek and Emily @stampingbella . We love it when you connect, so don’t be shy!
Until next time, HAPPY STAMPING!
MWAH
Elaineabella