For the box top:

Take the 7.5″ x 7″ piece of card and score at 2.25 and 6.25″ on the 7.5″ side

Flip 90 degrees and score at 1″ and 2.25″

Using a scissors, cut on the 1″ and  the 2.25″ scorelines in to the intersection.

Cut away the outer 1″ sections and taper the edges of the 5″ section in the middle.

Taper the tabs on both sides.

Measure down 1.5″ from the 2.25″ scoreline, on the outer section as shown, and mark with a pencil.

Repeat on the other side

Using a paper trimmer or scissors, cut diagonally from the 1.5″ pencil mark to the inside scoreline.

Apply double sided tape to the 5″ section and set aside.

For the box base:

Take the 7.5″ x 9.25″ piece of black card and score at 1.25″ and 6.25″ on the 7.5″ side.

Flip 90 degrees and score at 2.5″ and 3.75″

Create 2 tabs by cutting on the 2.5″ and 3.75″ scorelines, in to the intersection.

Taper the tabs on both sides.

To construct the box:

Retrieve the box top that was previously set aside. Remove the backing from the double sided tape and adhere the 1″ tab to the inside of the box base, on the opposite end to the 2.5″ section.

Cut a piece of patterned paper measuring 4 7/8″ x 5 3/8″ and adhere to the centre panel on the inside of the box.

Cut 2 pieces of white card measuring 1 1/8″ wide x 4 5/8″ long. Lay one piece on top of the wedged side of the box top to use as a guide for cutting. Mark with a pencil and cut diagonally. Repeat for the other side.

Cut pieces of white card measuring:

• 4 5/8″ x 4 7/8″
• 4 7/8″ x 1 1/8″
• 2 3/8″ x 4 7/8″

Adhere the patterned paper to each of the white card pieces and adhere to the top part of the box.

For the base front panel, cut one piece of white card measuring 2 3/8″ x 4 7/8″ and patterned paper measuring 2.25″ x 4.75″ and adhere to the 2.5″ section at the end of the box base

Apply double sided tape to the outside of the 4 tabs and adhere them to the inside of the box to create the box shape.

Apply double sided tape to the inside of the 2.5″ x 1.25″ sections of the box base

Fold up the base and adhere the 1.25″ sections to the outside of the box sides.

Fold the top of the box down and it should look like this.

For the belly band:

Take the 2 pieces of black card measuring 2.25″ x 7 5/8″ and score both at 1.25 and 6 5/16″

Mark the 1.25″ ends on both pieces and when adhering the pieces together, ensure they are opposite ends.

Fold and crease the scorelines with a bone folder.

Apply double sided tape to the ends and adhere together (remember to have the 1.25″ pieces on opposite ends.

Slip the belly band over the box to ensure it fits.

Cut a piece of white card measuring 4 7/8″ x 2 1/8″ and a piece of patterned paper measuring 4.75″ x 2″ and adhere them together. Stick them down onto the front of the belly band.

Stamp the image onto white card and colour with your desired medium. Cut it out using a circle die and then cut a larger black circle.

 Adhere both circles together.

Remove the belly band from the box and adhere the image to it, ensuring to only apply glue to the centre part of the image circle.

For the divider:

Take the  2″ x 3.25″ piece of black card and score at 0.25″, 1.5″, 1.75″ and 3″

Fold and crease all the score lines, then apply glue to one end.

Adhere the ends together to make a narrow box shape

Apply glue to both 0.25″ sides

Slip the divider behind the box front, centering it.

Stamp the sentiment onto some white card and adhere to the front of the box base.

Fill the box with coffee sachets (and cookies)

Fold the top of the box down and slip on the belly band to secure it.